If your Tecno Spark 20 (KJ5) is stuck on the logo screen, has bootloop issues, or you need to flash it back to factory settings, this page provides the official stock firmware (build 231226V896) for both the Global (OP) and India (IN) variants, for a safe, complete restore using SP Flash Tool.
Firmware Details
- Device Model: Tecno Spark 20 (KJ5)
- Build Number: 231226V896
- Firmware Type: Stock / Official
- File Format: .zip (SP Flash Tool package)
- Chipset: MediaTek Helio G85 (MT6769Z)
- Variants Available: Global (OP) and India (IN)
Which Variant Should You Download?
Tecno releases region-specific builds for the same KJ5 model. Check your device's build number in Settings → About Phone before flashing:
- KJ5-H6931ABCDEFGHI-T-OP-231226V896 — Global / Other-region variant (OP)
- KJ5-H6931DEF-T-IN-231226V896 — India-specific variant (IN)
Flashing the wrong regional variant can cause network band mismatches or IMEI/network issues, so always confirm your exact build before proceeding.
Requirements Before Flashing
- A Windows PC/laptop
- SP Flash Tool (for MT6769 chipset)
- Tecno/MediaTek USB VCOM drivers installed
- At least 50% battery on the device
- A good-quality USB cable
Download Tecno Spark 20 (KJ5) Stock Firmware
KJ5-H6931ABCDEFGHI-T-OP-231226V896
KJ5-H6931DEF-T-IN-231226V896
Files hosted on Google Drive • Direct Link
How to Flash This Firmware (SP Flash Tool Method)
- Download and extract the correct ZIP file for your variant using WinRAR or 7-Zip.
- Inside the extracted folder, you'll find the firmware files, scatter file, and SP Flash Tool.
- Install the MediaTek USB VCOM drivers on your PC (skip if already installed).
- Open SP Flash Tool and click "Choose" to load the Scatter File from the firmware folder.
- Select "Download Only" in SP Flash Tool.
- Power off your phone completely, then connect it to the PC via USB cable.
- Wait for the flashing process to complete — a green circle/checkmark confirms success.
- Disconnect the device and boot it normally (first boot may take a few minutes).
Important Precautions
Warning: Flashing this firmware will completely erase all data on your device, including photos, apps, and settings. Please take a full backup before proceeding. Ensure you flash the correct regional variant (OP or IN) matching your original build, and do not disconnect the device during the flashing process, as this can result in a hard brick.
Frequently Asked Questions (FAQ)
Q1. Will this firmware erase my data?
Yes, flashing will wipe all personal data on the device. Always back up important files first.
Q2. How do I know which variant (OP or IN) my phone needs?
Check Settings → About Phone → Build Number. If it ends in "-IN-", use the India variant. If it ends in "-OP-" or shows a different region code, use the Global variant.
Q3. Do I need a PC to flash this?
Yes, this firmware is flashed using SP Flash Tool on a Windows PC.
Q4. What happens if I flash the wrong variant?
You may experience network band issues, missing carrier features, or in rare cases, IMEI-related problems. Always match the variant to your original build before flashing.
Disclaimer: Flash at your own risk. Always verify your exact device model and regional variant before flashing, as installing incorrect firmware can damage your device. Gsm-Buzz is not responsible for any data loss or hardware issues resulting from this process.
No comments:
Post a Comment