If your Infinix Hot 30 (X6831) is stuck on the logo screen, has bootloop issues, or you need to flash it back to factory settings, this page provides the official stock firmware (build V7510AABCDEFJ-T-OP-231218V2410) for a safe, complete restore using SP Flash Tool.
Firmware Details
- Device Model: Infinix Hot 30 (X6831)
- Build Number: V7510AABCDEFJ-T-OP-231218V2410
- Firmware Type: Stock / Official
- File Format: .zip (SP Flash Tool package)
- Chipset: MediaTek Helio G88 (MT6769)
What Can This Firmware Fix?
- Bootloop or "stuck on logo" issues
- Dead boot / no display after a failed update or flash
- Removing pattern lock, PIN, or forgotten password (factory reset)
- Device hangs, freezes, or lags after a corrupted system
- Reverting a custom ROM or recovery back to full stock
Requirements Before Flashing
- A Windows PC/laptop
- SP Flash Tool (for MT6769 chipset)
- Infinix/MediaTek USB VCOM drivers installed
- At least 50% battery on the device
- A good-quality USB cable
Download Infinix Hot 30 (X6831) Stock Firmware
File hosted on Google Drive • Direct Link
How to Flash This Firmware (SP Flash Tool Method)
- Download and extract the ZIP file using WinRAR or 7-Zip.
- Inside the extracted folder, you'll find the firmware files, scatter file, and SP Flash Tool.
- Install the MediaTek USB VCOM drivers on your PC (skip if already installed).
- Open SP Flash Tool and click "Choose" to load the Scatter File from the firmware folder.
- Select "Download Only" in SP Flash Tool.
- Power off your phone completely, then connect it to the PC via USB cable.
- Wait for the flashing process to complete — a green circle/checkmark confirms success.
- Disconnect the device and boot it normally (first boot may take a few minutes).
Important Precautions
Warning: Flashing this firmware will completely erase all data on your device, including photos, apps, and settings. Please take a full backup before proceeding. Ensure you are flashing the correct model (X6831) and build, and do not disconnect the device during the flashing process, as this can result in a hard brick.
Frequently Asked Questions (FAQ)
Q1. Will this firmware erase my data?
Yes, flashing will wipe all personal data on the device. Always back up important files first.
Q2. Do I need a PC to flash this?
Yes, this firmware is flashed using SP Flash Tool on a Windows PC.
Q3. Will this remove my pattern lock or FRP?
A full stock firmware flash will remove the screen lock/pattern. Google FRP lock may still appear after reboot on Android 8+ devices and would need a separate bypass step.
Q4. Is this firmware safe to use?
Yes, as long as you confirm your device is the Infinix Hot 30 (X6831) model before flashing. Flashing the wrong model's firmware can damage your device.
Disclaimer: Flash at your own risk. Always verify your exact device model before flashing, as installing incorrect firmware can damage your device. Gsm-Buzz is not responsible for any data loss or hardware issues resulting from this process.
No comments:
Post a Comment