Infinix Hot 8 (X650) Stock Firmware Download (V482_210527)

If your Infinix Hot 8 (X650) is stuck on the logo screen, has a dead boot, forgotten pattern lock, or needs a clean reinstall after a bad custom flash, this page provides the official stock firmware (build V482_210527) to safely restore your device to 100% factory condition using SP Flash Tool.

Firmware Details

• Device Model: Infinix Hot 8 (X650)
• Build Number: V482_210527
• Firmware Type: Stock / Official
• File Format: .zip (SP Flash Tool package)
• Chipset: MediaTek MT6580

What Can This Firmware Fix?

• Bootloop or "stuck on logo" issues
• Dead boot / no display after a failed update or flash
• Removing pattern lock, PIN, or forgotten password (factory reset)
• Device hangs, freezes, or lags after a corrupted system
• Reverting a custom ROM or recovery back to full stock

Requirements Before Flashing

• A Windows PC/laptop
• SP Flash Tool (for MT6580 chipset)
• Infinix/MediaTek USB VCOM drivers installed
• At least 50% battery on the device
• A good-quality USB cable

Download Infinix Hot 8 (X650) Stock Firmware

⬇ Download Firmware (V482_210527)

File hosted on Google Drive • Direct Link

How to Flash This Firmware (SP Flash Tool Method)

1. Download and extract the ZIP file using WinRAR or 7-Zip.
2. Inside the extracted folder, you'll find the firmware files, scatter file, and SP Flash Tool.
3. Install the MediaTek USB VCOM drivers on your PC (skip if already installed).
4. Open SP Flash Tool and click "Choose" to load the Scatter File from the firmware folder.
5. Select "Download Only" in SP Flash Tool.
6. Power off your phone completely, then connect it to the PC via USB cable.
7. Wait for the flashing process to complete — a green circle/checkmark confirms success.
8. Disconnect the device and boot it normally (first boot may take a few minutes).

Important Precautions

Warning: Flashing this firmware will completely erase all data on your device, including photos, apps, and settings. Please take a full backup before proceeding. Ensure you are flashing the correct model (X650) and build, and do not disconnect the device during the flashing process, as this can result in a hard brick.

Frequently Asked Questions (FAQ)

Q1. Will this firmware erase my data?
Yes, flashing will wipe all personal data on the device. Always back up important files first.

Q2. Do I need a PC to flash this?
Yes, this firmware is flashed using SP Flash Tool on a Windows PC.

Q3. Will this remove my pattern lock or FRP?
A full stock firmware flash will remove the screen lock/pattern. Google FRP lock may still appear after reboot on Android 8+ devices and would need a separate bypass step.

Q4. Is this firmware safe to use?
Yes, as long as you confirm your device is the Infinix Hot 8 (X650) model before flashing. Flashing the wrong model's firmware can damage your device.

---

Disclaimer: Flash at your own risk. Always verify your exact device model before flashing, as installing incorrect firmware can damage your device. Gsm-Buzz is not responsible for any data loss or hardware issues resulting from this process.